Finale

So before i put this to an end, let's just check if everything's works fine.

Once satisfied, i move the whole thing on top of my TV Cabinet at the living room. And play some games overnight with everything's turning on.

Next day, it's time to fill it in with the liquids again.

What happen is, i thought that i have enough ballast, so that i do not need to put more liquids. It ended up, not having enough liquids. Sigh.

As for the Electronic dancing BMX and Skates, i had underestimated the power of the liquids. I have attached the BMX and Skates with strong glue so well previously, but still it lose to the oil. It didn't dance properly now. And for the sound activated lights, i replaced it with Sound activated LED (EL) taken from miniature T-Shirt.



In the next video, you will see,
Minutes 0:00 - Started with CPU fan switches turn on.
Minutes 0:05 - The side case fan, The rear wall plug attached with the case.
Minutes 0:13 - Custom switches board with toggle jet fighter switches.
Minutes 0:19 - A bunch of cable out from the case, Water hose connect to radiator.
Minutes 0:28 - 2nd switch for the 3M RGB LED.
Minutes 0:46 - 4th switch will turn on the Dancing thing and the LED EL.
Minutes 0:54 - 5th switch for the moonlight
Minutes 1:00 - 6th switch will turn on the Motherboard background light.
Minutes 1:12 - 3rd switch turned on the PSU light.
Minutes 1:23 - second look for the moonlight mode
Minutes 1:54 - First Jet Fighter toggle switch to turn on the radiator fan.

There are still lots more to fix. But i haven't got any free time since then. 

To Do...
Moonlight - need more LED's
Water Pump and Radiator - Didn't use it for now cause the liquids still not completely filled.
BMX and Skates - Need fix.
Liquids - Bought lots of them but decided not to fill it in before fixing the BMX and Skates.
Ballast - More ballast, more ballast, more ballast.

So let's stop for now. I'm soooooo lazy to blog now. Still got lots to do.